Description
The Rots-3 Stand is a product manufactured by ZKTeco. Please note that due to periodic system and product upgrades, ZKTeco cannot guarantee the exact consistency between the actual product and the information written in this manual.
Dimensions
- Top view: 2,224″ (56.5mm)
- Side View: 1.772″ (45.0mm)
- Adjustable angle: 1.969″ (50.0mm)
- Wall Mount Holes: 2.559″ (65.0 mm)
- Backplate mounting holes: 3.189″ (81.0 mm)
- Wiring Hole: 3.465″ (88.0mm)
Installation diagram
The Rots-3 mount consists of a backplate, a wiring hole, hex screws, an adjustment nut and a bottom cover.
Product instructions for use
How to route cables through cable holes.
- Remove the three screws from the bottom cover with a Phillips screwdriver.
- Remove the bottom cover.
- Route the cables through the cable holes before attaching the back plate to the base.
- Insert the cable through the cable hole and replace the bottom cover with the screws.
Note : The device has two cable holes, which users can choose according to their needs.
How to install the wall mount bracket
- Drill four mounting holes in suitable locations on the wall. The recommended height from the ground is 1.5 meters, which can be adjusted according to the actual situation.
- Securely attach the mounting bracket to the wall using four wall mounting screws.
How to connect the device with the mounting bracket
- See backplate for supported models (e.g. ProFaceX, SpeedFace V4L, SpeedFace V4LM1, SpeedFace V3L, SpeedFace V5/V5L, Elite Series).
- Choose different mounting holes to fix the device according to the backplate of the compatible model.
