Description
Installation requirements
- The PS-5CA can be used with one of the following antennas (not included):
- Horn-5-30
- Horn-5-45
- Horn-5-60
- Horn-5-90
- U-OMT antenna
- The GPS antenna needs to have a clear line of sight to the sky for GPS to work properly.
- 13mm Wrench
- 5mm hex screw (recommended for the mounting bracket )
- Category 5 (or higher) shielded cabling with drain wire must be used for all Ethernet connections and must be connected to the PoE AC ground.
We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti's industrial-grade Ethernet shielded cable. For more information, please visit ui.com/toughcable
- Surge protection must be used at all outdoor installations. We recommend that you use two surge protectors, model ETH-SP, one near the PrismStation and one at the building entry point. The ETH-SP will absorb surges and safely discharge them to the ground.
Specs
|
Dimensions
|
155 x 155 x 104 mm (5.16 x 5.16 x 4.09") 83 x 117 x 69 mm (3.27 x 4.61 x 2.72") |
|---|---|
|
Weight
|
0.77 kg (1.70 lb) 0.79 kg (1.74 lb) |
|
Network interface |
(1) 10/100/1000 Ethernet port |
|
Radio frequency connector |
(1) GPS |
|
LED |
Feeding |
|
Maximum power consumption |
10W |
|
Power supply |
24V, 1A Gigabit PoE Adapter (included) |
|
Feeding method |
Passive PoE 24V (pairs 4, 5+ for forward and 7, 8 for return) |
|
Supported voltage range |
From 20 to 26 V DC |
|
Wind load |
31 N @ 200 km/h (7 lbf @ 125 mph) |
|
Wind resistance |
200 km/h (125 mph) |
|
Operating temperature |
-40 to 70° C (-40° F to 158° F) |
|
Operating humidity |
5 to 95% non-condensing |
|
Mounting |
Pole mount (kit included) |
|
ESD/EMP Protection |
± 24 kV contact/air |
|
Certifications |
CE, FCC, IC |
