Description
Installation requirements
- 13mm Wrench
- Category 5 (or higher) shielded cabling with drain wire must be used for all Ethernet connections and must be connected to the PoE AC ground.
We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti's industrial-grade Ethernet shielded cable. For more information, please visit ui.com/toughcable
- Surge protection must be used at all outdoor installations. We recommend using two surge protectors, model ETH-SP, one near the PowerBeam and one at the building entry point. The ETH-SP will absorb surges and safely discharge them to the ground.
Specs
|
Dimensions (with radome) |
459 x 459 x 261 mm (18.07 x 18.07 x 10.28 " ) |
|---|---|
|
Weight (including assembly) |
3.22 kg (7.10 lb) |
|
Revenue |
25 dBi |
|
Network interface |
(1) 10/100/1000 Ethernet port |
|
Material |
UV stabilized plastic exterior |
|
Maximum power consumption |
8.5W |
|
Power supply |
24V 0.5A Gigabit PoE Adapter (included) |
|
Feeding method |
Passive PoE (pairs 4, 5+ for the forward and 7, 8 for the return) |
|
Wind resistance |
200 km/h (125 mph) |
|
Wind load |
559 N and 200 km/h (125.7 lbf and 125 mph) |
|
Certifications |
CE, FCC, IC |
|
Mounting |
Pole mount (kit included) |
|
Operating temperature |
-40 to 70° C (-40° F to 158° F) |
|
Operating humidity |
5 to 95% non-condensing |
|
Impacts and vibrations |
ETSI300-019-1.4 |
Recently viewed:
Best selling products:
