Description
Installation requirements
- LTU PtMP access point (like the LTU-Rocket model).
- 13mm Wrench
- Surge protection must be used at all outdoor installations. We recommend using two Ethernet surge protectors (model ETH-SP-G2), one near the device and one at the building entry point. The ETH-SP-G2 will absorb surges and safely discharge them to the ground.
Specs
|
Dimensions |
316.5 x 316.5 x 174.3 mm (12.46 x 12.46 x 6.86") |
|---|---|
|
Weight |
1.3 kg (2.87 lb) |
|
Network interface |
(1) 10/100/1000 Ethernet port |
|
Material |
UV stabilized plastic exterior |
|
Maximum power consumption |
9 W |
|
Power supply |
24V 0.5A Gigabit PoE Adapter (included) |
|
Feeding method |
24V Passive PoE input (pairs 4, 5+; 7, 8-) |
|
Supported voltage range |
22 - 26 V |
|
Revenue |
24 dBi |
|
Amplitude |
14° |
|
Side lobe level |
-10 dB |
|
Front to rear ratio |
27 dB |
|
Mounting |
Pole mount (kit included) |
|
Wind load |
150 N @ 200 km/h (33.72 lbf @ 125 mph) |
|
Wind resistance |
200 km/h (125 mph) |
|
ESD/EMP Protection |
± 24 kV contact/air |
|
Operating temperature |
-40° C to 60° C (-40° F to 140° F) |
|
Operating humidity |
5 to 95% non-condensing |
|
Certifications |
CE, FCC, IC |
