Description
Installation requirements
- LTU PtMP access point (like the LTU-Rocket model).
 - Phillips screwdriver for wall mounting
 - Category 6 (or higher) shielded cabling and shielded RJ45 connectors are required for all Ethernet cable connections.
 - Surge protection must be used at all outdoor installations. We recommend using two Ethernet surge protectors (model ETH-SP-G2), one near the device and one at the building entry point. The ETH-SP-G2 will absorb surges and safely discharge them to the ground.
 
Specs
| 
 Dimensions  | 
  153 x 84 x 39.5 mm  | 
|---|---|
| 
 Weight  | 
 250 g (8.82 oz)  | 
| 
 Network interface  | 
 (1) 10/100/1000 Ethernet port  | 
| 
 Material  | 
 UV stabilized plastic exterior  | 
| 
 Maximum power consumption  | 
 8.5 W  | 
| 
 Power supply  | 
 24V 0.5A Gigabit PoE Adapter (included)  | 
| 
 Feeding method  | 
  2-Pair Passive PoE (Pairs 4, 5+; 7, 8-)  | 
| 
 Supported voltage range  | 
 22 - 26 V  | 
| 
 Revenue  | 
 13 dBi  | 
| 
 Mounting  | 
 Pole Mount Wall mounting (kit included)  | 
| 
 Wind resistance  | 
 200 km/h (125 mph)  | 
| 
 Wind load  | 
  20 N @ 200 km/h  | 
| 
 ESD/EMP Protection  | 
 ± 24 kV contact/air  | 
| 
 Operating temperature  | 
 -40° C to 60° C (-40° F to 140° F)  | 
| 
 Operating humidity  | 
 5 to 95% non-condensing  | 
| 
 Certifications  | 
 CE, FCC, IC  | 
Recently viewed:
Best selling products:

      
      
      
      
      
      
                        
                      
                        
                      
                        
                      
                        
                      
                        
                      
                    
                    
                    
                    
                    


