Description
Installation requirements
- Category 5 (or higher) shielded cabling with drain wire must be used for all outdoor wired Ethernet connections and must be connected to the PoE AC ground.
We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti's industrial-grade Ethernet shielded cable. For more information, please visit ui.com/toughcable
- Surge protection must be used at all outdoor installations. We recommend that you use two surge protectors, model ETH-SP, one near the NanoStation loco and the other at the building entry point. The ETH-SP will absorb surges and safely discharge them to the ground.
Specs
|
Dimensions |
179 x 77.5 x 59.1 mm |
|---|---|
|
Weight |
180 g (6.35 oz) |
|
Processor |
MIPS 74K |
|
Memory |
64MB DDR2 memory |
|
Antenna gain |
13 dBi |
|
Network interface |
(1) 10/100/1000 Ethernet port |
|
Feeding method |
2-pair passive PoE (pairs 4, 5+ for forward and 7, 8 for reverse) |
|
Power supply |
Gigabit PoE power supply 24 V, 0.3 A* |
|
Maximum power consumption |
7W |
|
Supported voltage range |
24V ± 10% |
|
ESD/EMP Protection |
± 24 kV contact/air |
|
Operating temperature |
-40 to 70° C (-40° F to 158° F) |
|
Operating humidity |
5 to 95% non-condensing |
|
Certifications |
CE, FCC, IC |
