Description
Installation requirements
- It must be installed without obstacles at the top, for the correct operation of the GPS
- 7mm socket wrench or screwdriver
- Category 5 (or higher) shielded cabling must be used for all Ethernet connections and must be connected to the PoE AC ground.
We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti's industrial-grade Ethernet shielded cable. For more information, please visit ui.com/toughcable
- Surge protection must be used at all outdoor installations. We recommend that you use two surge protectors, model ETH-SP, one near the LiteAP and the other at the building entry point. The ETH-SP will absorb surges and safely discharge them to the ground.
Specs
|
Dimensions (mount not included) |
360.98 x 124.57 x 71.28 mm |
|---|---|
|
Weight (mount not included) |
752 g |
|
Network interface |
(1) 10/100/1000 Ethernet port |
|
Antenna gain |
17 dBi |
|
Maximum power consumption |
7.1W |
|
Maximum transmission power |
25 dBm |
|
Power supply |
24V 0.3A Gigabit PoE Adapter (included) |
|
Feeding method |
Passive PoE (pairs 4, 5+ for the forward and 7, 8 for the return) |
|
Supported voltage range |
From 20 to 26 V DC |
|
ESD/EMP Protection |
± 24 kV contact/air |
|
Impacts and vibrations |
ETSI300-019-1.4 |
|
Wind resistance |
200 km/h (125 mph) |
|
Wind load |
77 N @ 200 km/h |
|
Operating temperature |
From -40 to 70° C |
|
Operating humidity |
5 to 95% non-condensing |
|
Certifications |
CE, FCC, IC |
Recently viewed:
Best selling products:
