Description
Facility Overview
We recommend that you set up your airFiber devices before mounting. Installation is described in general below, with specific details in the instructions below:
- Connect Power over Ethernet to the data port and connect an Ethernet cable between the computer and the management port.
- Configure the device settings in the airFiber configuration interface.
- When setup is complete, disconnect the cables to move the airFiber devices.
- Pre-assemble the mounting hardware.
- Install the airFiber devices at the installation site.
- Establish and optimize the RF link.
Specs
|
Dimensions |
938.4 x 468.4 x 281.4 mm (36.94 x 18.44 x 11.08") |
|---|---|
|
Weight |
|
| Mounting not included | 11.5 kg (25.35 lb) |
| Includes assembly | 16 kg (35.27 lb) |
|
Operating frequency |
|
| FCC 15.247, IC RSS 21 | 5725 - 5850 MHz |
| ETSI EN 302 502 | 5725 - 5875 MHz |
| Other regions | 5725 - 6200 MHz |
|
Maximum power consumption |
40 W |
|
Power supply |
50V 1.2A Gigabit PoE Adapter (included) |
|
Feeding method |
Passive Power over Ethernet |
|
Mounting |
Pole mounting kit (included) |
|
Wind load |
863 N at 200 km/hr (194 lbf at 125 mph) |
|
Wind resistance |
200 km/hr (125 mph) |
|
Operating temperature |
-40 to 55° C (-40 to 131° F) |
|
Certifications |
CE, FCC, IC |
|
Network interface |
|
| Data port | (1) 10/100/1000 Ethernet port |
| Management port | (1) 10/100 Ethernet port |
