Description
Installation requirements
- airFiber 5GHz radio device (sold separately)
 - Phillips screwdriver #1
 - 16mm Wrench
 - 24mm Wrench
 - It must be installed without obstacles at the top, for the correct operation of the GPS
 -  Mounting point:
- At least 1 m below the highest point of the structure
 - For installation on towers, at least 3 meters below the top of the tower
 
 - Ground wire: minimum 10 AWG (5 mm 2 ) and maximum length of: 1 m. As a precaution, connect the airFiber radio device to a grounded outlet, pole, tower, or ground rod.
 
| 
 
  | 
 WARNING: Failure to connect properly will void your warranty.  | 
|---|
- Category 6 (or higher) shielded cabling must be used for all Ethernet connections and must be connected to the PoE AC ground.
 
Specs
| 
 Dimensions  | 
 1050 x 1050 x 421mm (41.34 x 41.34 x 16.57")  | 
|---|---|
| 
 Weight  | 
 13.5 kg (29.76 lb)  | 
| 
 Frequency  | 
 5.1 - 5.8 GHz  | 
| 
 Revenue  | 
 34 dBi  | 
| 
 Max VSWR  | 
 1.4:1  | 
| 
 Wind resistance  | 
 200 km/h (125 mph)  | 
| 
 Wind load  | 
 1779 N at 200 km/h (400 lbf at 125 mph)  | 
| 
 Polarization  | 
 Double linear  | 
| 
 Front/rear lobe ratio  | 
 42 dB  | 
| 
 ETSI specification  | 
 EN 302 326 DN2  | 
| 
 Mounting  | 
 Universal pole mount, airFiber radio device holder and waterproof RF jumpers included  | 
Recently viewed:
Best selling products:

      
      
      
      
      
      
                        
                      
                        
                      
                        
                      
                    
                    
                    



