Description
- 5 10/100/1000 Mbps RJ45 ports
- With four PoE+ ports, transfer data and power in a single cable
- Works with IEEE 802.3af/at compliant PDs
- 802.1p/DSCP QoS enables smooth latency-sensitive traffic
- Supports PoE power up to 30W for each PoE port
- Supports PoE power up to 40W for all PoE ports *
- Plug and play, no setup or installation required
Specs
| HARDWARE FEATURES | |
|---|---|
| Interface | • 5 10/100/1000 Mbps RJ45 ports • Self-negotiation • AUTO MDI/MDIX |
| Network Media | • 10BASE-T: UTP cable category 3, 4, 5 (maximum 100 m) • EIA / TIA-568 100 Ω STP (maximum 100 m) • 100BASE-TX: Category 5, 5e UTP cable (maximum 100 m) • EIA / TIA-568 100 Ω STP (maximum 100 m) • 1000BASE-T: Category 5, 5e, 6 or higher UTP cable (maximum 100 m) • EIA / TIA-568 100 Ω STP (maximum 100 m) |
| Number of Fans | Without fan |
| External Power Supply | External power adapter (output: 53.5V DC / 0.81A) |
| Packet Forwarding Rate | 7.44 Mpps |
| PoE ports (RJ45) | • Standard: Supports 802.3 af/at • PoE ports: ports 1–4 • Power supply: 40 W |
| MAC Address Table | 2K |
| Jumbo Frame | 16 KB |
| Switching Capacity | 10 Gbps |
| Dimensions | 3.9×3.9×1.0 in (99.8×98×25mm) |
| Maximum Power Consumption | • 4.12 W (220/50 Hz. Without PD connected) • 47.5 W (220/50 Hz. With 40 W PD connected) |
| Maximum heat dissipation | • 14.05 BTU/h (without PD connected) • 161.98 BTU/h (with 40W PD connected) |
| SOFTWARE FEATURES | |
|---|---|
| Advanced Features | • Supports IEEE 802.3af/at compliant PDs • Auto-learning and auto-aging of Mac addresses • IEEE 802.3x flow control • 802.1p QoS / DSCP • IGMP Snooping |
| Transfer Method | Store and forward |
| OTHERS | |
|---|---|
| Certifications | FCC, CE, RoHS |
| Package Contents | • TL-SG1005LP • Power adapter • Installation guide |
| Environmental Factors | • Operating temperature: 0–40℃ (32–104℉); • Storage temperature: -40–70 ℃ (-40–158 ℉) • Operating humidity: 10 to 90% relative humidity non-condensing • Storage humidity: 5–90% relative humidity non-condensing |
