MIRCOM MIX-810MPU Double action addressable manual station with key

Mircom's MPS-800MP(U) Series manual fire alarm stations provide manual activation of the fire alarm. The new MPS-800MP(U) Series uses raised symbols and icons instead of printed text making them universally recognized. The addressable manual stations are available for single or two stage operation and are double action type. They are compatible with the FX-400 and Flex-Net FX-4000 Series Fire Alarm Panels.

MPS-800(U) manual pull stations are constructed of high quality thermoplastic “LEXAN” polycarbonate resin that withstands high temperatures without deformation. The operating temperature range is -40ºC to 66ºC. MPS-800MP(U) addressable manual pull stations are accessible from the front for wiring and termination while mounted, making installation easy. Manual pull stations can be mounted over simple rectangular electrical junction boxes and mounting holes allow for easy alignment to the wall.

The “U” suffix indicates the UL listed version. All manual pull stations must be installed in accordance with specific requirements outlined in UL, ULC, and applicable national or local codes. Addressing is performed using the MIX-4090 device programmer. To program the device address, the following procedure must be performed: disconnect both ends of the SLC communication loop and plug the cable end of the programmer into the programming port located on the manual pull station module. Once completed, programming is performed. Failure to perform these steps may result in the previously programmed address of the previous device being inadvertently changed.

Characteristics

• Made entirely of LEXAN thermoplastic resin.
  
• They meet the requirements cited by the American law for the protection of the disabled ADA of maximum activation force of 5 pounds and one-handed operation without wrist rotation.
  
• There is no text printed on the devices, symbols and icons are used instead.
  
• Raised symbols make operating instructions easier to recognize by touch.
  
• Compatible with FX-400 Series and Flex-Net FX-4000 control panels.
  
• Easy installation.
  
• Accessible from the front of the station to perform and terminate wiring while it is assembled.
  
• They mount in a standard rectangular electrical junction box.
  
• Temperature range from -40ºC to 66ºC / 32ºF to 120ºF.
  
• The devices come with a reset key.
  
• Indoor use.
  
• Alarm LED visible from the front of the station makes fault identification and correction easy.

Specs