Description
The MIX-M500RAP relay control module contains two isolated sets of Form C contacts, which operate as a DPDT switch to provide the system with outputs to activate a variety of auxiliary devices such as fans, dampers, control equipment, etc. The module allows the control panel to switch these contacts upon command. No supervision is provided for the relay contacts.
Specs
| Normal operating voltage | 15 to 32 VDC |
| Maximum alarm current | 6.5 mA (LED on) |
| Average operating current | 300 μA, 1 communication every 5 seconds |
| End of life resistance | Not used |
| Temperature range | 32˚F to 120˚F (0˚C to 49˚C) |
| Humidity | 10% to 93% non-condensing |
| Dimensions | 4.5˝ high x 4˝ wide x 1.25˝ deep |
