Description
The MIX-4040 Mini Input Module is an intelligent addressable device designed for use with a compatible MGC control panel that provides high, reliable and secure data exchange rates using a bi-directional communication protocol. The module provides (2) independent contact monitoring circuits using only one (1) module address on the SLC loop.
The module supports one (1) input in Class A configuration or two (2) inputs in Class B configuration. When configured for Class A operation, the module provides an internal EOL resistor. When configured for Class B operation, the module monitors two (2) independent input circuits.
The module has a panel-controlled LED indicator. The LED flashes during normal operation and remains on steadily when the device is in alarm condition.
The address of each module is programmed using the MIX-4090 programming tool. To set the address on this device, disconnect it from the loop or ensure that the loop it is connected to is disconnected from the panel and shorted between the SCL+ and SLC- inputs of the device. Failure to follow any of these steps may change the address programming of sensors previously configured on the loop.
Characteristics
- Up to 240 MIX-4000 Series devices can be connected in any combination, on a single SLC signaling loop.
- Mounts in rectangular electrical box.
- The LED indicator provides the status of the module
Specs
| Normal Operation Voltage | 15 to 30 VDC |
| Max Current in Alarm | 3.3mA (LED On) |
| EOL end of line resistance | 22K Ohms |
| Maximum resistance of Cabling |
150 Ohms Total |
| Temperature Range | 32ºF to 120ºF (0ºC to 49ºC) |
| Humidity | 10% to 93% Non-condensing |
| Dimensions | 1.25” Height x 2.75” Width x 0.50” Depth |
| Connection Tips | 6 inch cables |
| Current in Operation Normal. (2 Class B) |
2mA |
Recently viewed:
Best selling products:
