Description
- 8 10/100 Mbps PoE ports, 1 Gigabit RJ45 port
- Total PoE power budget 60W
- Supports 802.1Q VLAN
- Supports PoE control to detect and reboot unresponsive cameras
- Supports STP/RSTP loop prevention
- Supports cable detection to locate faults
- Long range PoE transmission up to 300m
- 6 kV surge protection
Specs
| General | |
| Case | Metal material, fanless design. |
| Net weight | 0.4 kg (0.9 lbs) |
| Gross weight | 0.9 kg (2.0 lbs) |
| Dimensions (W x H x D) | 170.00mm × 27.60mm × 93.10mm (6.69'' × 1.09'' × 3.67'') |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Storage temperature | -40°C to 85°C (-40°F to 185°F) |
| Humidity conditions | 5% to 95% (non-condensing) |
| Relative humidity | 5% to 95% (non-condensing) |
| Power supply | 54 VDC, 1.2 A |
| Installation mode | Desktop mount, wall mount |
| Max. Power Consumption | 65W |
| Power consumption at idle | 5W |
| Surge protection | 6 kV |
| Network parameters | |
| Ports | 8 10/100 Mbps PoE ports, 1 Gigabit RJ45 port |
| MAC Address Table | 8 thousand |
| Switching capacity |
Whole device throughput: 5.6 Gbps Port throughput: 3.6 Gbps |
| Packet forwarding rate |
Whole device performance: 4.17 Mpps Port throughput: 2.68 Mpps |
| Internal cache | 4Mbps |
| PoE power supply | |
| PoE standard | IEEE 802.3af, IEEE 802.3at |
| PoE power pin | Final section: 1/2(-), 3/6(+) |
| PoE port | PoE: Ports 1 to 8 |
| Max. Power Port | 30 watts |
| PoE power budget | 60 watts |
| Software function | |
| Long range |
Ports 1 to 8: up to 300 m. Long range performance may vary depending on camera model or cable condition. |
| Hydroelectric plant |
Supports one-click activation and remote management via Hik-Partner Pro. Supported functions: 1. Displays the port speed. 2. Displays the port bandwidth utilization rate. 3. Displays PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable long range port mode. 8. Update the device remotely. |
| Port isolation |
Ports 1 to 8: Port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| System maintenance |
Supports web-based device management. Supports DHCP client. Enabled by default for dynamic allocation of management IP addresses. Supports Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management through Hik-Central Pro. Supports remote management via Hik-Partner Pro. Supports cable detection. Abnormal open circuits and short circuits, as well as the length of the network cable, can be detected. Supports 802.1ab LLDP for peer device discovery. Supports port mirroring for troubleshooting. |
| PoE Monitoring | Ports 1-8: Automatically detect and reboot unresponsive cameras. |
| Loop prevention |
Loop prevention is used to prevent the switching network from forming loops that severely affect network communication. Disabled by default. Supports 802.1D STP. Supports RSTP 802.1w. |
| VLAN |
VLAN is used to plan network scale and improve network health. Supports 802.1Q. VLAN ID configurable from 1 to 4094. Trunk Support, Access Port Mode. Supports a maximum of 4094 VLANs. |
| Certifications | |
| Electromagnetic compatibility | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Security | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemical | CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No. 1907/2006) |
Recently viewed:
Best selling products:
