Description
|
Description |
Cisco Catalyst 9120AX Access Point, internal antennas; WiFi 6; 4x4:4 MIMO, S Domain with integrated wireless controller. |
|
Software |
● Cisco Unified Wireless Software, Release 8.9.x or later ● Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later |
|
Supported Wireless LAN Drivers |
● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
|
802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with four spatial streams ● Maximum Ratio Combination (MRC) ● 802.11n and 802.11a/g beamforming ● 20 and 40 MHz channels ● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmission and reception), A-MSDU (transmission and reception) ● Dynamic Frequency Selection (DFS) 802.11 ● Cyclic shift diversity (CSD) support |
|
802.11ac |
● 4x4 downlink MU-MIMO with four spatial streams ● CRM ● 802.11ac beamforming ● 20, 40, 80 and 160 MHz channels ● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmission and reception), A-MSDU (transmission and reception) ● DFS 802.11 ● CSD Support |
|
802.11ax |
● 4x4 downlink MU-MIMO with four spatial streams ● Uplink/Downlink OFDMA ● TWT ● BSS for coloring ● CRM ● 802.11ax beamforming ● 20, 40, 80 and 160 MHz channels ● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmission and reception), A-MSDU (transmission and reception) ● DFS 802.11 ● CSD Support |
|
Integrated antenna |
Flexible radio (either 2.4GHz or 5GHz) ● 2.4 GHz, 4 dBi maximum gain, internal antenna, omnidirectional in azimuth ● 5 GHz, 5 dBi maximum gain, internal antenna, omnidirectional in azimuth Dedicated 5GHz radio ● 5 GHz, 4 dBi maximum gain, internal antenna, omnidirectional in azimuth |
|
External antenna (sold separately) |
● Cisco Catalyst 9120E access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) ● Cisco Catalyst 9120P access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N antenna. ● Cisco offers the industry's widest selection of antennas, providing optimal coverage for a variety of deployment scenarios ● Supports self-identifying antennas (SIA) on an RP-TNC port |
|
Smart antenna connector |
● Only available on the 9120E and 9120P ● Compact multi RF connector with DART interface ● Requires AIR-CAB002-DART-R= 2-foot smart antenna connector when used with antennas with RP-TNC connector ● Required when running the flexible radio as a second 5 GHz service radio or a wireless security monitoring radio |
|
Interfaces |
● 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz ● Management console port (RJ-45) ● USB 2.0 at 3.75W (enabled via future software) |
|
Indicators |
● The status LED indicates the bootloader status, pairing status, operational status, bootloader warnings, and bootloader errors. |
|
Dimensions (width x length x height) |
● Access Point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7” (21.6 x 21.6 x 4.3 cm) |
|
Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE®) ● Cisco Power Injector, AIR-PWRINJ6= ● PoE 802.3af ● Cisco Power Injector, AIR-PWRINJ5= (Note: This injector only supports 802.3af) |
|
Environmental |
Cisco Catalyst 9120AXI ● Non-operating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Non-operating altitude test (storage): 25˚C, 15,000 ft. ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (non-condensing) ● Operational altitude test: 40˚C, 9843 ft. |
|
System memory |
● 2048 MB DRAM ● 1024 MB Flash |
|
Available transmit power settings |
2.4 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) ● -1dBm (0.79 mW) ● -4 dBm (0.39 mW) 5 GHz ● 26 dBm (400 mW) ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) ● -1dBm (0.79 mW) |
|
Frequency band and operating channels of 20 MHz |
S (S regulatory domain): ● 2.412 to 2.472 GHz; 13 channels |
