Description
SIP Intercom with One Button (Video & Card Reader)
1. Body Material: Full Aluminum
2.Camera: 3M pixels, automatic lighting, 116º Wide Angle
3.RF Reader 13.56MHZ&125KHZ
4.Output Relay: 2 relays for door opening
5.IP65 (Waterproof and dustproof)
6.Installation mode: Surface mounted or recessed with additional mounting.
7.PoE (IEEE802.3af, Power-over-Ethernet); 8.Two-way communication over IP and with Echo Cancellation
9.Complies with SIP standard for easy integration with SIP PBX
-
At a glance
- Vandal resistant body with flush button;
- Wide angle camera: 110º (H), 58º (V);
- PoE (IEEE802.3af, Power over Ethernet);
- Two-way audio communication over IP networks with Echo Cancel function;
- Compliant with SIP standard for easy integration into any SIP-capable PBX;
- Compliant with ONVIF standard for easy integration with any network surveillance system;
-
Physics and power
- Front panel: Aluminum alloy
- Camera: 2M pixels, auto illumination
- Button: 1 call button
- Light sensor: support
- Infrared sensor: Support
- Wiegand Port: Support
- RS485 port: Support
- RF Card Reader: 13.56MHz (with NFC) and 125kHz
- Relays out: 2
- Tickets: 2
- Microphone: -40dB
- Speaker: 4Ω / 3W
- Ethernet port: RJ45, 10/100Mbps adaptive
- Power over Ethernet 802.3af
- 12V DC connector (if PoE is not used)
- Water and dust resistant: IP65
- Installation: Recessed or wall mounted
- Flush mount DIM: 189x120x56.5mm
- Wall mount DIM: 145x85x27.5mm
- Working humidity: 10~90%
- Working temperature: -30°C ~ +60°C
- Storage temperature: -40°C ~ +70°C
-
Audio
- SIP version 1 (RFC 2543), SIP version 2 (RFC 3261)
- Narrowband audio codec: G.711a, G.711μ, G.729
- Wideband audio codec: G.722
- DTMF: DTMF In-band, Out-of-band (RFC2833), SIP information
- Echo cancellation
- Voice Activation Detection
- Comfort noise generator
-
Video
- Sensor: 1/2.7”, CMOS
- Pixels: CIF, QCIF, VGA, 4CIF, 720p, 1080p
- Video codec: H.264
- Video resolution: up to 1920x1080p
- Maximum image transfer rate: 1080p – 30 fps
- Viewing angle: 110°(H) / 58°(V)
- High intensity IR LEDs for image illumination during dark hours with internal light sensor
- Compatible with third-party video components, e.g. NVR
-
Door entry function
- Relays individually controlled by DTMF tones
- Camera in permanent operation
- Automatic night mode with LED lighting
- White balance: automatic
- Minimum illumination: 0.1 LUX
-
Networks and protocols
- Supported protocols: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
-
Implementation and maintenance
- Auto provisioning
- Web management portal
- Web-based packet dump
- Backup/Restore Settings
- Exporting log entries
- Export/Import Access Tables
- Firmware Update
- System logs (including door access logs)
-
Application scenario
- Office Intercom with Hosted or On-Site IP-PBX
- Remote login to the site via the Internet
- Apartment/flat intercom with door access control
